Rotho Blaas VGS11100 11mm x 100mm Carbon Steel + Zinc Plated Torx T50 Drive Symmetrical Coarse Thread Sharp 1 Cut Tip Countersunk Head with Ribs Fully Threaded Screw w/Bit (25/Pack)
TENSION - Deep thread and high resistance steel (fy,k = 1000 N/mm2) for excellent tensile performance. Approved for structural applications subject to stresses in any direction vs. the grain (a = 0° - 90°). Ideal for joints requiring high tensile or sliding strength. Can be used on steel plates in combination with the VGU washer.
COUNTERSUNK HEAD - Ideal for use on plates or for concealed reinforcements.
CHROMIUM (VI) FREE - Total absence of hexavalent chromium. Compliance with the strictest regulations governing chemical substances (SVHC). REACH information available.
Features
- VGS is the structural wood screw with total thread, perfect for making joints that require high tension or sliding strength.
- In combination with the WASP hook, it is useful as a lifting and transport system.
- VGS wood screws: excellent resistance and reliability for your structural uses.
- VGS wood screws feature a deep thread and high resistance steel (fy,k = 1000 N/mm2) for excellent tensile performance.
- They are approved for structural applications subject to stresses in any direction vs. the grain (a = 0° - 90°).
- The countersunk head, up to 600 mm long, is excellent for use on plates or for concealed reinforcements.
- Values are also tested, certified and calculated for fastening standard Rothoblaas plates. Total absence of hexavalent chromium.
- Compliance with the strictest regulations governing chemical substances (SVHC).
- REACH information available.
- In carbon steel with bright zinc plated, they are ideal for use with wood-based panels, solid timber, glulam, CLT, LVL and high-density woods. Service classes 1 and 2.
Specifications
- Diameter: 11mm (0.44”)
- Length: 100mm (4”)
- Head: Countersunk with Ribs
- Thread: Symmetrical Coarse Thread
- Tip: Sharp 1 Cut
- Materials and Coatings: Carbon Steel + Zinc Plated
- Drive: Torx T50
- Pieces: 25
Characteristics
- FOCUS: 45° connections, lifting and reinforcements.
- HEAD: Countersunk with ribs for L = 600 mm hexagonal for L > 600 mm
- DIAMETER: 9.0 | 11.0 | 13.0 mm
- LENGTH: from 100 to 1200 mm
Material
Applications
- Timber based panels
- Solid timber
- Glulam (Glued Laminated Timber)
- CLT, LVL
- High density woods
- Service classes 1 and 2.