Dewalt Anchors & Fasteners 08310SD-PWR Pure110+® 9 fl. oz. Quik-Shot cartridge (1:1 mix ratio)
The Pure110+ is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The Pure110+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete and masonry base materials and for post-installed reinforcing bar connections.
Features
- Designed for use with threaded rod and reinforcing bar hardware elements
- Evaluated and recognized for freeze/thaw performance
- Cartridge design allows for multiple uses using extra mixing nozzles
- Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
- Evaluated and recognized for long term and short term loading (see performance tables)
- Same bond strength at room temperature and at 110ºF
Specifications
- Item Number: 08310SD
- Box Quantity: 12
- Storage life and Conditions: Two years in a dry, dark environment with temperature ranging from 41 degrees Fahrenheit to 95 degrees Fahrenheit.
- Anchor Size Range (Typ.): 3/8" to 1-1/4" diameter threaded rod No. 3 to No. 8 reinforcing bar (rebar).
- Suitable Base Materials: Normal-weight concrete.
General Applications & Uses
- Bonding threaded rod and reinforcing bar into hardened concrete.
- Rebar development length connections in concrete.
- Evaluated for installation and use in dry and wet holes, including water filled and submerged.
- Can be installed in a broad range of base material temperatures with good working times.
- Cracked and uncracked concrete.
- Seismic and wind loading.
- Oversized hammer-drilled holes in concrete, for short term loading only.
Approvals & Listings
- International Code Council, Evaluation Service (ICC-ES) ESR-3298 for cracked and uncracked concrete
- Code Compliant with 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, 2009 IBC/IRC
- Conforms to requirements of ASTM C 881 and AASHTO M235, Types I, II, IV and V, Grade 3, Classes B & C (also meets Type III except for elongation)
- Department of Transportation listings – see www.DEWALT.com or contact transportation agency
- Tested in accordance with ACI 355.4, ASTM E 488, and ICC-ES AC308 for use in structural concrete (Design according to ACI 318-14, Chapter 17 and ACI 318-11/08 Appendix D)
- Tested and qualified for use in post-installed reinforcing bar connections
- Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading
- Compliant with NSF/ANSI 61 for drinking water system components - health effects; minimum requirements for materials in contact with potable water and water treatment