Dewalt Anchors & Fasteners 0500SD-PWR PE1000+® 13 fl. oz. Dual Cartridge Epoxy Injection Adhesive Anchoring System
The PE1000+ is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The PE1000+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete and solid masonry base materials.
Features
- Designed for use with threaded rod and reinforcing bar hardware elements
- Consistent performance in low and high strength concrete (2,500 to 8,500 psi)
- Evaluated and recognized for freeze/thaw performance
- Evaluated and recognized for long term and short term loading (see performance tables for applicable temperature ranges)
- Evaluated and recognized for variable embedments (see installation specifications)
- Cartridge design allows for multiple uses using extra mixing nozzles
- Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
- Easy dispensing reduces applicator fatigue
Specifications
- CATALOG NUMBER: 0500SD-PWR
- DESCRIPTION: PE1000+ 13 FL. OZ. DUAL CARTRIDGE
- PACK QTY: 12
General Applications & Uses
- Bonding threaded rod and reinforcing bar into hardened concrete and grouted CMU
- Evaluated for use in dry and water-saturated concrete (including water-filled holes)
- Cracked and uncracked concrete
- Seismic and wind loading
- Hammer-drill and diamond core drilled holes
- Can be installed in a wide range of base material temperatures
Approvals & Listings
- International Code Council, Evaluation Service (ICC-ES) ESR-2583Code compliant with the 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
- Tested in accordance with ACI 355.4 and AC308 for use in structural concrete according to (Strength Design) ACI 318-14 Chapter 17 and ACI 318-11/08 Appendix D.
- Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading
- Compliant with NSF/ANSI Standard 61 for drinking water system components – health effects; minimum requirements for materials in contact with potable water and water treatment
- Conforms to requirements of ASTM C 881 and AASHTO M235, Types I, II, IV and V, Grade 3, Classes B & C (also meets type lll except for elongation)