SawStop CNS175-TGP236 Universal Performance Contractor Table Saw CNS™ with 36" T-Glide Fence Assembly
The SawStop® Contractor Saw offers versatility and safety.
36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection.
CONFIGURABILITY: Over 150 unique configurations, makes the Contractor Saw the most configurable SawStop saw. Adding a mobile base, sliding crosscut table or router table, are just a few of the ways to make this your ideal saw.
UNIVERSAL PERFORMANCE: The Contractor Saw offers versatility, reliability and safety for a variety of users. The cast iron table top (Cast Iron Wing Assembly, CNS-CIWA, sold separately) creates a better-than-hybrid performance in the shop at an affordable price.
SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.
RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe.
UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. Poly v-ribbed belts reduce vibration and help ensure a great cut. Table flatness is measured diagonally at 0. 010” maximum gap.
Features
- 36" Professional T-Glide Fence System provides smooth operation, precision measurement and sure lockdown without deflection.
- SawStop Safety System stops on contact with skin.
- Includes Two Steel Extension Wings
- The most configurable saw in the SawStop lineup
- Dimension: 69 1/8" w, 45" d, 34 3/4" h
- Precision, performance and safety all come together to make this the right choice for experts looking for a reliable saw at an affordable price.
Specifications
- 36" Rip Capacity: CNS175-TGP236 w/36” T-Glide Fence Assembly
- Motor Option(s) (60Hz TEFC): 1.75 HP available
- Overall saw dimensions 36 in: 69 1/8" W x 45" D x 34 3/4" H
- Motor Configuration(s): CNS175: 1.75 HP, 120v, 14 A (user config. to 220v w/optional kit available for purchase).
- Saw body footprint: 25 3/4" W x 27" D (w/stand installed)
- Cast iron table: 20" W x 27" D
- Cast iron table (w/ extension wings): 44" W x 27" D
- Extension wings: 12" W x 27" D Stamped Steel (optional cast iron for purchase)
- Extension table 36 in: 23 3/4" W x 27" D
- Shipping weights - w/ 36 in fence systems: 350 lbs (4 boxes)
- Shipping dimensions (saw body only): 35" W x 30" D x 20" H
- Shipping weight (approx.): 240 lbs (table saw only)
- Assembled weights - w/ 36 in fence systems: 310 lbs
- Weights - table saw only: 225 lbs
- Weights - (optional cast iron wings): 35 lbs each
- Blade: 40-tooth, prof. grade, 5/8" arbor
- Blade diameter: 10"
- Blade tilt: Left
- Blade kerf: 0.118" (3mm)
- Blade plate thickness: 0.078" (2mm)
- Max. depth of cut, blade at 0º: 3 1/8"
- Max. depth of cut, blade at 45º: 2 1/4"
- Max. rip, left of blade (w/36” or 52” T-Glide Fence): 12 1/2"
- Max. rip, right of blade (w/36” Fence): 36 1/2" (w/optional 36" rails)
- Dado diameter: 8" (requires dado brake cartridge & insert)
- Dado max. width: 29/32”
- Arbor diameter at blade: 5/8"
- Main bearing size: 62mm OD x 30mm ID
- Second bearing size: 52mm OD x 25mm ID
- Table in front of blade (max. elevation): 10 5/8"
- Table behind blade (max. elevation): 7 1/8
- Arbor Runout: 0.001" Maximum allowable runout
- Table flatness measured diagonally: 0.016" Maximum gap
- Blade alignment with miter slot: 0.010" Maximum displacement
- Deviation of miter gauge indexing stops from actual: ±0.25º
- Alignment between splitter and blade: 0.010" Maximum difference
- Miter slots T-shaped: 3/4" at top, 1" at bottom, 3/8" deep
- Miter slots center: 11 1/8" center-to-center
- Miter slots info: 5 1/2" (arbor flange to center of right slot)
- Dust collection port diameter: 4"
- Riving knife / splitter thickness: 0.090" (2.3 mm)
- Blade guard: Standard polycarbonate, extends 1" right of blade (opt dust guard for purchase)
- Insert: zero clearance, phenolic core, melamine surfaces
- Hand wheels: 6" diameter, cast alum. w/ ABS handle
- Belts: V-ribbed belt – static dissipative
Includes
- (2) Steel Extension Wings
- (1) Miter Gauge
- (1) Micro Blade Guard
- (1) Riving Knife
- (2) Blade Wrenches
- (1) Push Stick
- (1) 10” Blade
- (1) Standard Lockdown Insert
- (1) Standard Brake Cartridge
- (1) Owner’s Manual
- (1) Assembly Instructions
- (2) Hardware Packs
- (1) 3mm Hex Key
- (1) 5mm Hex Key
- (1) 8mm hex Key
- (1) Blade Spacing Adjustment Gauge